LED Neon signs are some of the best signage solutions because they are so captivating, bright, and easy to maintain. These lights will continue to dazzle passers-by throughout the year with hardly any effort on your part.
Even though they function basically hands-free, they will need to be cleaned from time to time. Let’s take a look at how to keep your neon sign fresh and bright throughout the year.
How to Dust LED Neon Signs
Neon signs have a lot of contours because the tube structure of these lights is contoured for a 3D effect. Because of the contoured structure, the sign can collect a bit of dust on top of the lettering. It is best to dust your signs a couple of times a year so they will stay clean. Outdoor signs can be dusted about once a month to keep buildup from dimming the brightness of the letters.
Fortunately, it is pretty easy to dust off these signs. Simply grab a feather duster and gently dust the sign from top to bottom. You don’t have to turn off or unplug the sign for this process, but try to work gently so you don’t knock it off the wall.
The sign can also be dusted with a slightly damp cloth. For this, it is usually best to unplug the sign just to be safe.
How to Clean LED Neon Signs
Over time, the dust can start settling on the surface materials of the sign. Signs can also become a little bit stained over time, especially if they are outside, where they are constantly exposed to the elements. If it is time to clean your neon sign, then it is best to always unplug the sign before you get cleaning.
-
Cleaning Outdoor Signs
For general cleaning of your outdoor sign, you can mix a little bit of dish detergent in some water. Now, grab a soft cloth and saturate it. Wring out the cloth and gently wipe the surfaces and tubes of the neon sign. Don’t saturate this light. Even though the sign is waterproof, it is always best not to use too much fluid on an electronic device.
Rinse out the cloth and wipe down the entire sign again to remove any soapy residue. The soap will make the surfaces sticky and might cause them to get dirty much quicker.
Wait until the sign is completely dry, and plug it back in. It should be bright and shiny again.
-
Removing Stains from LED Neon Signs
Stains on the sign surface can obscure some of the light or colours. If your sign has a few stains, then you can mix awesome ammonia in water. Grab a rag and dampen it in the mixture. Now gently dab and rub against the stain. Rub it until the stain is cleared away.
Use a clean, damp rag to wipe down the surface to remove any leftover soap. Wait until your neon sign is dry and switch it back on.
How to Protect LED Neon Signs
Neon signs operate at low voltages and temperatures, and they are crafted from UV-reflective and waterproof materials. This means that the sign should stay perfectly functional throughout the year with minimal care. There are, however, a few things you can do to help your signs last a lifetime.
-
If the sign is burning 24 hours a day, then try switching it off for a day about twice a month. You can also use the dimmer and reduce the light intensity if you are keeping it on 24/7.
-
Don’t mess with the wiring, and ensure that the cables are properly tucked away so they won’t be yanked or so moisture cannot get to the wires.
-
Hire professionals to restore your neon signs when they become faulty or worn down.
Buy Quality Neon Signs
Neon signs are fantastic because they can continue burning brightly throughout the day and night, and you hardly have to do anything to keep them in good shape. Contact Neon Party if you are looking for one of these low-maintenance and functional signs. Our signs can be custom-made to suit your image or preference and will last a very long time.
